솔지에로펜션(소나무숲길로)

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repairs can save homeowners money and make their homes comfortable. Window replacement is often required in the event of severe damage like broken glass or a window frame that has been smashed.

But there are many other issues that can be repaired to extend the life of your windows. The most frequent issues are:

Broken or cracked panes

Cracked windows can be caused by a lawnmowers who throws rocks at the wrong time or the blow of a tree branch by strong winds. It's not just visually awful, but it could result in higher energy bills because broken glass lets cold air into your home. It's fairly easy to fix windows with damaged panes.

Start by carefully removing the glass with gloves and safety glasses. You may have to use an utility knife to loosen old glazing compound or putty around the frame's edges. Next, wipe down the glass's surface and the frame's wood using a soft cloth or paper towel.

Once the frame is clean, apply a waterproof silicone caulking to the perimeter of the frame. This will stop water from getting in through the crack, which could cause further damage to both the frame and the glass.

A bad crack in double-paned glass may affect the gas between the panes, rendering your windows less efficient in insulating. If the crack is severe enough to threaten the integrity of the glass, or in the case of an inner pane that's completely missing, it's time to call in a professional.

Cracks caused by thermal stress can occur when there's an extreme temperature difference both inside and outside your home. This causes the glass to expand and shrink. If this happens across two windows it's recommended to simply replace the pane rather than trying to repair it.

Clear tape can be used to seal cracks in windows that aren't yet ready for replacement. It will also keep out cold and bugs. You can cut an amount of nylon stocking big enough to completely cover the crack, and then attach it using duct tape. This isn't a long-term solution however it's a great solution in a pinch and it keeps cold air and insects out of your home. If you notice cracks appearing on your windows that are older, you should check with your local company to see if replacing the whole window is a better option.

Rotten Wood

Wood rot is among the most frequent issues with windows. It can degrade a house's appearance and pose a safety risk. It is possible to repair the wood that has rotted. You will first need to determine the root of the wood's decay. This can be accomplished by checking for roof leaks or gutters that are not functioning, cracked caulking and any other areas that allow water to enter the wood.

The next step is to remove any rotten areas of the window frame. This can be done using a claw hammer, chisel or a rasp. After the areas that are rotten have been removed, you will need to replace them with new wood. Pre-treated wood is recommended for this task, since it will resist rot. If you are unable replace the wood that has been damaged, you can try using wood filler or hardener to repair the damaged area. The majority of hardware stores carry this type of product. Follow the instructions on the label of the product to get the most efficient results.

Once you have repaired the rotten areas of the windowsill, it is crucial to safeguard the newly repaired area. You can do this by applying a water-resistant wood sealant. A product like Sikkens is an excellent option to accomplish this task.

Use a two-part epoxy to protect the wood against further damage. This product is easy to apply and leaves a beautiful finish. However, it is very important to follow the application instructions on the label. After the epoxy filler has dried, you are able to smooth the surface of the wood. Start with a rough sandpaper, and then move on to more smoother grades.

You don't want to expose your damaged part to further moisture. Therefore, it is a good idea to cover the area that has been repaired with an oil-based primer that will shield it from moisture. After that, you can apply the wood sealant, which is waterproof.

The Won't open

The reason a window won't open could be due to various reasons. Wood frames can warp in rainy weather, or the house may have settled or someone may have nailed it shut to protect themselves. However, with a bit of patience and the right tools, most windows that are stuck can be opened.

The accumulation of gunk or debris can be a major cause of the window not opening. Grime and dirt build up on the sliding tracks, hinges and locks over time, according to Acme Glass. Metal hardware may also rust if it comes into contact with humidity and direct sunlight. Spray grease on these areas will help to prevent oxidation and keep your windows functioning correctly.

Stuck windows can also be the result of a loosening or breakage of the pulleys used to raise and lower the window. These components can lose their tension and cause obstruction particularly when the window is two or more stories above the ground.

If you're having trouble opening the window, try using a pry bar to gently force the window repair to open a bit at a time. Place a wood block on the frame to give the pry bar more leverage and be careful not to damage the window or the wood. Alternatively, try running a hair dryer across the edges of the frame for several minutes to warm the wood and help it move more easily.

Another issue with windows that don't open is a broken spring that keeps the window jamb from rising or lowering. You will need to consult your owner's guide for more information depending on who made your windows.

If you've tried cleaning and lubricating the moving components on your windows, but they still won’t open, then it may be time to replace windows. Homespire Windows & Doors provides windows that are energy efficient. Don't let your windows slide from functional to inoperable since a window that isn't properly shut can leave your home vulnerable to water damage and burglary. Contact us to learn more about our windows replacement services and products today!