솔지에로펜션(소나무숲길로)

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions against theft with the Ghost Immobiliser. This system is discrete and does not require additional key fobs in order to operate.

The device makes use of buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin sequence that can be modified up to 20 times. This will allow your vehicle to begin.

Simple change of PIN code

Many owners are upgrading their security because of the increase in vehicle theft. There are many types of security products that are available, from tracking systems to immobilisers and alarms. However, not all of them are equally effective at protecting your vehicle. A tracking system may help you locate your vehicle if it's stolen however, it won't prevent the crime. An immobiliser, on other hand is exactly what says on the tin: it shuts down your car's engine to prevent it from being started. The Autowatch ghost 11 immobiliser immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to take your car.

Utilizing the buttons already in your car The ghost device generates an unique sequence that must be entered before the engine can start. This can be done using the heater, window or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their car stolen with ghost immobiliser without the button sequence. This feature is particularly beneficial if you have to hand your car over to a valet service or parking, as the immobiliser is active and not deactivated.

The Ghost is a unique and innovative device that works in conjunction with buttons in your vehicle rather than as a separate unit. It's not just an effective deterrent to theft of your vehicle, but it can also be used on any future vehicles you own. This makes it a far better investment than a traditional wheel lock.

Small, weatherproof device

The Autowatch ghost 2 immobiliser near me immobiliser is a sophisticated security system that protects your pride and joy against key cloning, hacking and ECU swapping. It is a tiny weatherproof device that connects with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be placed in the vehicle without the need for extra wiring, and has been thoroughly tested to make sure it works with all vehicles. It is also immune to jamming devices, which are a common technique that car thieves use to circumvent immobilisers.

The advantage of CAN data over conventional systems is that they operate silently. It cannot be detected using sophisticated RF scanning and code-grabbing technology as well as recognized by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators, but instead uses buttons on your vehicle, like the steering wheel, centre console, or door panels, to create a an unique sequence of disarming. The sequence can be extended by up to 20 presses for additional security. The iPhone app allows only one connection, with an individual pairing code for the Ghost. All communication between the two devices is protected.

The Ghost also stops thieves from stealing a new key or replacing the ECU to bypass the immobiliser to start the engine. The engine will only run when a valid PIN code is entered. It is able to be operated temporarily in the Valet/Service mode (with the appropriate parameters, like 30mph speed limit) and, therefore, you can hand your car to valet or service without having to enter a code.

Tested for each vehicle

The Autowatch ghost alarm installation near me is a world-first aftermarket immobiliser CANbus. It can be connected to the vehicle's wiring and also to the engine control unit (ECU). The device is able to intercept signals and stop your car from starting up normally until you enter a custom code. The system can be activated or deactivated via your smartphone's app without the need for extra wires.

Standard factory immobilisers for vehicles work by having a transponder built into the key that sends an indication to the ECU. The car will begin to start if the correct code is transmitted. However, if the transponder from another vehicle is used instead, the immobiliser doesn't recognise it. This allows the vehicle be started and stolen. A South African company that is at the forefront of safety systems technology has developed the Ghost immobiliser. It protects you from hacking or key cloning, and even key theft. The only way thieves could take your car is by physically towing it away and even then they would not be able to drive it.

Ghost makes use of buttons in your vehicle, like the indicator stalk, steering wheel, and doors, to generate unique PIN codes that needs to be entered to use your car. This is done without the need for additional hardware, such as keys-fobs, and can last up to 20 presses long. It is also inaccessible to equipment for diagnostics and does transmit radio frequency signals, which means thieves are not able to use sophisticated RF scanners or code grabbing technologies to detect that an installation has been made.

Contrary to physical anti-theft devices such as wheel locks or clamps, Ghost is concealed within the vehicle so it can't be taken away or disabled by thieves. It's more difficult to remove than a car alarm that requires disarming using the use of a button sequence. This makes it a perfect supplement to a GPS tracker that can assist in locating your car after it's been stolen.

Override of emergency PIN code

You do not have to look far on social media to find stories or videos of vehicles that have been stolen using the most advanced technology tools. This includes key-cloning devices and hacking devices that allow them to start your vehicle without your original key fobs.

The Ghost immobiliser helps combat this and gives you an additional layer of security to prevent your vehicle from being stolen if it is targeted by thieves. It generates a unique pin code when pressing the buttons on your steering wheel, door panel and centre console. The unique pin code is entered along with the original key fob to prevent the engine from getting started. The unique PIN for override is on the black card that you will receive following your installation. It's easy to remember since there aren't any LEDs.

The device is hidden inside the vehicle's wires, and doesn't emit any radio signals, which means it cannot be recognized by thieves with diagnostic software that can detect the type of security system you have installed. This makes it a fantastic alternative to a tracker.

Contrary to other security systems which use a relay in engine bay, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to disable the vehicle completely by sending a digital block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm, or tracker with these systems but this must be specified prior to installing the device. They also work with valet/service modes and is a great alternative to a tracking device when you take your car into the dealer for repairs to an electrical issue.

Service/Valet Mode

In recent times there has been an rise in the number of vehicles being stolen with no owner's keys. It is easier than ever before to take your joy and pride thanks to the availability of key cloning tools & door lock picks. We have created the Autowatch ghost installers near me Immobiliser to combat this. It stops your vehicle from being driven even if your keys have been copied.

It communicates directly with your car's ECU (Engine Control Unit), via the data loop called CAN. It's completely silent as it doesn't utilize radio frequencies or a key fob. This means it cannot be detected by diagnostics or other vehicle hacking devices. It also shields against the possibility of adding an additional key or replacing the ECU to bypass the system as only the correct PIN code will allow the engine to start.

The device is hidden in your vehicle and is accessible via buttons on your steering wheel, the centre console, and door panels. Before you can start your car, you need to enter a unique and reversible PIN code up to 20 digits.

This is the first aftermarket CAN-bus immobiliser that was developed. It will stop your vehicle from being started or driven if you don't enter a PIN number first. If the device is in armed and you attempt to drive away, it will display a warning on your dash that will flash continuously for about 300m. If you enter your PIN code at this point, it will deactivate the anti-hijack device and your car will continue to drive as normal. If you do not enter your PIN in this moment, the indicator will continue to flash and will require a new pin code every time you try to start your car.