솔지에로펜션(소나무숲길로)

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

Depending on how old your Subaru is, you may need to have your key fob programmed by an automotive or dealer locksmith. This is accomplished by connecting a computer machine to your vehicle.

To program your Subaru, start by unlocking the driver's door using the door button control, and then close it. You will hear the chime sound and see the dome lights blink in the instrument panel.

Step 1: Find the circuit board for your transmitter

There are many ways to program your keyfob. First, you need to determine what kind of key fob you own. You can do this by looking at the shape of the key fob or by listening to the car for a sound.

Once you have the details and have it, you can begin the process of programming your keyfob at home. To do this, you will need a metal key and a flathead screwdriver. Open the key fob case by twisting it. Push the metal key into the case and then let go of the battery by pressing the tabs that hold it in place. Replace the battery with a fresh one, and then put the key fob case back together.

Step 2 Step 2: Unscrew your Key Fob Case

It is recommended to replace the battery of key fobs if they're not functioning. In some cases the buttons on the key fob could be broken. If you see that the metal contacts of the button are loosened, try soldering them in place again in order to make them work again.

Make sure you turn off your ignition and close your doors prior to you begin. You can do this by closing the driver's side door and pressing your door button ten times in quick intervals. Then, you'll hear the instrument panel chime and your dome lights will blink. This indicates that you are prepared to move forward.

Step 3: Insert the Key Fob in the ignition

Many articles on the internet will show you how to get replacement subaru key to program your new or replacement subaru key Subaru keyfob at home. However, the majority of them don't offer very specific instructions. Reprogramming an electronic key is best done by an expert auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat with all doors shut and the engine turned off. Use the door button to open all of the doors. Open and close the driver's door three times. Remove and insert the ignition key (don't rotate it) 10 times over 40 seconds. The system will sound a chirp when the settings are altered.

Step 4: Turn the Ignition On.

It is crucial to understand that this method of programming a key fob only is effective if you have a working key. If you don't then a dealership or auto locksmith will be required to program a brand new key for your Subaru in Fort Bliss.

Once the key has been programmed, it should be capable of starting your vehicle within five minutes. Start by closing all doors and shutting off the engine. Next, sit in the driver's seat and open all doors using the door button control. Insert the key in the ignition and turn it back to the first position. The electrical systems will be activated, however, the engine will remain off. Repeat this process ten times.

Step 5 5. Unlock the Door of the Driver's Door

Subaru has a broad selection of high-end cars with key fobs that lock and unlock doors and start the car and defrost the windows. These devices are sometimes not functioning.

To resolve this issue to fix it, you must contact an auto locksmith or dealer. This will fix the issue and ensure that your vehicle is secure.

First, open and close the door to the driver's side. Then, you need to place the key in the ignition and move it to the first position. Then, you can turn it back to the off position. Perform this as fast as you can ten times. After the tenth repetition, you should hear a sound.

Step 6 Step 6: Press the Lock/Unlock buttons on the driver's Door

If you need to replace the battery on a replacement subaru keys key fob, the procedure is simple. Open the exterior fob case. Then make use of a flathead screwdriver to pry open the internal case and remove the old battery.

After removing the battery then replace it with a new one. Close the case. Relax in the driver's seat and then unlock all doors by using the door button control. Then, put the ignition key and turn it so that the electrical systems are powered on, but the engine is off. Repeat this 10 times until you hear a sound on the instrument panel. This will put the system into programming mode.

Step 7 7. Press the Lock/Unlock button on the Passenger's Door

For some owners, the annoying sound heard when locking or unlocking the subaru replacement key cost key fob from outside the vehicle could become distracting. In some cases, the chirp can be removed by closing and opening the doors as well as a double-click of the lock button on the key fob.

Close all doors, including the fuel-filler lid and turn off the ignition. For 10 seconds, press and hold the lock button on the key fob. After that the instrument panel will emit an audible chime. The chirp indicates that the door and fuel-filler lid are locked. The setting can also be changed to make the doors and lids of the fuel-filler lock automatically without having to press a request switch.

Step 8 Step 8: Enter your Transmitter's 8-digit Number.

Note down the first series of 8-digits, and keep it in a safe place. Now, sit in your driver's seat, shut all of the doors, and turn the ignition to the first position (towards on). After ten turns, the instrument panel should start to sound once.

The circuit board that controls the transmitter is located inside the key fob's case. There will be two or three sets of numbers (8-digits) on the circuit board. Follow the directions in the guide to register the code. This may require visiting the dealer for older models.