솔지에로펜션(소나무숲길로)

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the Ghost Immobiliser. This system is discrete and doesn't require additional key fobs.

The device makes use of buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin sequence that can be altered up to 20 times. This then authorizes the startup of your vehicle.

Simple PIN code Change Process

Many homeowners are upgrading their security due to the rise in vehicle theft. There are a myriad of security devices that are sold aftermarket, from tracking systems to alarms and immobilisers. However they do not all are equally effective in protecting your car. A tracking system may assist you in locating your vehicle in the event of it being stolen, but it will not prevent the crime. Immobilisers, on the contrary, do exactly what is a ghost immobiliser they say on the tin: they shut down the motor of your car to prevent it from being started. The autowatch ghost installer Ghost immobiliser is one of the most advanced options available on the market, making it almost impossible for thieves to steal your vehicle.

The ghost device makes use of the buttons on your car to generate an unique sequence that needs to be entered to allow the engine to begin. This can be done using the indicator stalk, window or heater buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their car without the button sequence. This is especially useful when you need to surrender your car to a valet service or parking since the immobiliser will remain activated, but not disabled.

The Ghost is a truly unique and innovative device that works in conjunction with buttons of your car instead of being a separate device. It is not only an effective deterrent to theft of your vehicle, but it can be used on future vehicles you own. This makes it a far better investment than a traditional wheel lock.

Weatherproof tiny device

The Autowatch Ghost Immobiliser is a sophisticated security system that protects your vehicle from key cloning and hacking. It also prevents ECU swapping. It's a small weatherproof device that connects with the ECU of your vehicle directly through the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without the need for extra wiring and has been thoroughly tested to make sure it is compatible with all vehicles. It is also resistant against jamming devices, which are a common method used by car thieves to bypass immobilisers.

The advantage of CAN data over traditional systems is that they operate in a silent manner. It is not able to be detected by sophisticated RF scanning and code-grabbing technology and cannot be recognized by conventional diagnostic tools. The Autowatch bmw x5 ghost installer doesn't emit LED indications and uses the buttons on your vehicle such as steering wheel, centre console or door panels to create a unique, programmable disarm sequence. You can even make this sequence as long as 20 presses for added security. The iPhone app lets you make one, authorized connection with a pairing code that is unique to the Ghost and the communication between the two devices is encrypted.

The Ghost also stops thieves from stealing the key to a new car or replacing the ECU to bypass the immobiliser and start the engine. The engine can only be started when a valid PIN code is entered. It can also be put in valet/service mode to allow for temporary operation (with specified parameters, such as a 30mph speed limit) so that you can give your car to a valet service or for maintenance without having to enter a PIN.

Each vehicle is tested

The Autowatch Ghost is the first aftermarket CANbus immobiliser. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device detects signals to stop your car from starting up normally until you enter a custom code. The system can be turned on or off through your smartphone's app without the need for extra wires.

The factory-installed immobilisers function by using a transponder that is built into the key. This sends a message to the ECU. If the correct code is transmitted the car will start, but if a transponder is replaced with one from a different vehicle, the immobiliser cannot recognize it. This allows the vehicle to be stolen and started. The Ghost immobiliser was developed by a South African company at the forefront of vehicle security systems technology. It shields your car from key cloning, hacking and even key theft. Only by physically towing your vehicle away from thieves could they get it, and they would still not be able to drive it.

Ghost 2 Immobiliser Near Me utilizes the buttons of your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels to create an unique PIN sequence that can be changed that must be entered prior to you can use your car. This is done without the need for additional hardware, such as key fobs and can be up to 20 presses long. It is also unrecognizable to diagnostic equipment and doesn't transmit radio frequency signals so thieves cannot make use of sophisticated RF scanning or code grabbing technology to discover that a security system has been installed.

Ghost is more difficult to remove than car alarms that require disarming with the buttons. This makes it a great alternative to an GPS tracking device that can be used to track your vehicle after it's been taken.

Emergency PIN code override

You don't have to look far on social media to find stories or videos about cars that were stolen using the latest technology tools. This includes key-cloning and hacking devices that allow you to start your car without your original key fobs.

The Ghost immobiliser has been specifically designed to prevent this and provide you with an additional layer of security to keep your vehicle from being targeted by thieves. It generates a unique pin code when pushing the buttons on your steering wheel, door panel, and centre console. This unique PIN is entered along with your original key fob to prevent the engine from beginning. The unique override pin is found on a black card that you receive following your installation. It is simple to remember since there aren't any LED indicators.

The device is hidden inside the vehicle's wires and does not emit radio signals, which means it cannot be detected by modern thieves with diagnostic software that can identify the security system you have installed. This makes it a great alternative to the tracker.

Contrary to other security systems which use a relay in engine bays, immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to shut down a vehicle completely, by sending a digital block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm, or tracker with these systems, but this has to be specified prior to installing the device. They are also fully service/valet-mode compatible and a great alternative to a tracker if you are you have your car checked for repairs to an electrical issue at the dealership.

Service/Valet mode

In recent years there has been a rise in the number of vehicles being stolen with the owners' keys. With easy access to key cloning equipment and door lock pick sets, it is now easier than ever for thieves to take your joy and pride. To combat this we have launched the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys have been copied or your car has been stolen.

It connects directly to your car's ECU (Engine Control Unit), via the data loop called CAN. It's completely silent as it doesn't utilize radio frequencies or key fobs. It cannot be detected using diagnostics or any other hacking device. It also stops you from adding an ECU or key to bypass the system because only the PIN number allows the engine to be started.

The device is hidden inside your car, using buttons on the steering wheel, centre console & door panels. Before you can start your vehicle, you must enter a unique and reversible PIN number that is up to 20 numbers.

This is the first aftermarket CAN bus immobiliser to be designed to stop your car being driven away or started in the event that a PIN code hasn't been entered first. If the device is armed and you attempt to drive away, it will display an indicator on your dash which will flash continuously for about 300m. If you type in your PIN code at this point it will deactivate the anti-hijack system and your vehicle will continue to operate just as normal. If you don't enter your PIN at this point the indicator will continue to flash and require a new PIN code every time you attempt to start your car.