솔지에로펜션(소나무숲길로)

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The ferrari ghost installer Immobiliser

Guard your precious possessions against theft with the Ghost Immobiliser. This system is discrete and doesn't require additional key fobs.

The device makes use of the buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique pin code sequence up to 20 presses. This will then authorize the start-up of your vehicle.

Simple PIN code change process

Many homeowners are upgrading their security because of the increase in vehicle theft. There are a variety of aftermarket security devices available from tracking systems to immobilisers and alarms. However, not all of these are equally effective in protecting your car. While a tracking device can assist you in locating your vehicle in the case of theft, it does not prevent the crime from happening in the first place. Immobilisers, on the contrary perform exactly as they say on the label - they shut off your car's engine so that it isn't able to be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it almost impossible for thieves to take your car.

The ghost device makes use of the buttons on your car to create an unique sequence that needs to be entered in order for the engine to start. This can be done by using the window, heater or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their car without the need to use the button sequence. This option is particularly useful when you need to give your car away for valet parking or maintenance because the immobiliser will still be activated, but not disabled.

The Ghost is a very unique and innovative device that works in conjunction with buttons on your vehicle instead of being a separate device. This means it's not only a highly effective deterrent against vehicle theft but also a transferable device onto any other vehicles you may own, making it more investment-wise than a traditional steering wheel lock.

Weatherproof small device

The Autowatch audi rs4 ghost installer; Bget`s statement on its official blog, Immobiliser is a sophisticated security system that safeguards your vehicle from key cloning and hacking. It also prevents ECU swapping. It is a small weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus, causing it to shut down the motor. It can be plugged into the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices, which is a common technique used by thieves to get around the immobilisers in place.

The benefit of CAN data over traditional systems is that they work silently. It cannot be detected using sophisticated RF scanning and code-grabbing techniques and cannot be detected by traditional diagnostic tools. The Autowatch Ghost doesn't use LED indicators and instead uses buttons on your vehicle, like the steering wheel, the centre console, or doors, to create an unique sequence of disarming. The sequence can be extended by 20 or more presses for additional security. The iPhone app allows only one connection, using the Ghost's unique pairing code. the ghost immobiliser review. All communication between the two devices is secured.

The Ghost also prevents thieves from stealing an additional key or replacing the ECU to bypass the immobiliser and start the engine. It will only allow the engine to start when the correct PIN code is entered. It can also be put into Valet/Service mode for temporary operation (with specified parameters, such as a 30mph speed limit) so that you can transfer your vehicle to a valet service or for servicing without the need to enter a pin code.

Each vehicle is tested

The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that can be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device detects electronic signals to block your car's system from running its normal startup routine until you input an individual passcode. The system can be activated and deactivated using your own smartphone application without the need for wires.

The standard factory immobilisers function by using a transponder, which is built into the key. This transmits a signal to the ECU. If the correct code is transmitted the car will begin, but if a transponder is replaced with one from another vehicle the immobiliser cannot recognize it. This allows the vehicle start and be stolen. A South African company that is at the forefront of vehicle safety systems technology created the ghost immobiliser fitter immobiliser. It guards you against hacking or key cloning and even key theft. The only way a thief could take your vehicle is physically towing it away and even then, they wouldn't be capable of driving it.

Ghost uses the buttons in your vehicle, including the indicator stalk as well as the steering wheel and door panels to generate a unique PIN code that is changeable that must be entered prior to you can use your car. This is not required to use additional hardware, such as key fobs and can be as long as 20 presses long. It is also undetectable to diagnostics equipment and does not transmit radio frequency signals, which means thieves are not able to utilize sophisticated RF scanning or code grabbing techniques to detect that the security system has been installed.

ford focus ghost installer is harder to remove than car alarms that require disarming by pressing the buttons. This makes it a great alternative to a GPS tracker, which can help locate your car after it's been taken.

Emergency PIN code override

You don't need to look far on social media to see stories or even videos of vehicles that have been taken by car thieves employing the most advanced technology tools available to them. This includes key-cloning devices as well as hacking tools that allow them to start the vehicle with your original keys.

The Ghost immobiliser was specifically designed to prevent this and offer an extra layer of security to keep your vehicle from being targeted by thieves. It creates a unique pin code by pushing the buttons on your steering wheel, door panel, and centre console. The unique pin code must be entered together with your original key fob in order to stop the vehicle from getting started. The unique override PIN is on the black card that you will receive following installation. It is simple to remember as there are no LED indicators.

The device is hidden in the vehicle's wiring and doesn't emit any radio signals, which means it can't be detected by modern criminals using diagnostic software that is able to identify the security system you have installed. This makes it an excellent alternative to a tracking device.

Contrary to other security systems that rely on a relay located in the engine bay, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to disable the vehicle completely by sending an electronic block of commands that is sent to both the ECU and the engine.

These systems can also be connected to a separate analogue alarm immobiliser, tracker or alarm. This should be decided prior to the installation. They also work with service/valet modes and is a great alternative to a tracking device when you bring your vehicle to the dealer to address an electrical issue.

Service/Valet Mode

In recent years, there has been a increase in the number of vehicles being stolen with no owner's keys. With the ease of access to key cloning equipment & door lock pick sets it is now much easier for thieves to steal your prized possessions. To prevent this from happening, we have launched the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys have been copied or your vehicle has been hijacked.

It directly communicates with your car's ECU (Engine Control Unit) through the CAN data circuit. It's completely silent as it doesn't use radio frequency or key fobs. This means that it can't be detected by diagnostics or other car hacking devices. It also shields against the possibility of adding an additional key or replacing the ECU to bypass the system, since only the correct PIN code will allow the engine to start.

The device is hidden inside your vehicle and is accessible via buttons on your steering wheel, the centre console and door panels. A unique and reversible PIN code sequence up to 20 digits has to be entered before you can start your car.

This is the first aftermarket immobiliser for CAN bus to be designed to stop your car being driven away or started without a PIN code being entered prior to. If the device is in armed and you attempt to drive away, it will display an indication on your dash which will flash regularly for around 300m. If you enter your PIN code at this point it will disable the anti-hijack device and your car will continue to drive in the normal way. If you do not enter your PIN code at this time the indication will continue to flash and require another PIN code for every attempt to start your car.