솔지에로펜션(소나무숲길로)

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Properly Start a Wood Burning Stove

Wood stoves are a comfortable way to heat a room and also save energy. They will require some maintenance.

A majority of modern wood burners uk wood stoves comply with EPA emission guidelines. Look for an EPA sticker under or beside the grate, to ensure that your stove doesn't generate many harmful pollutants.

How to Start a Wood Fire

The smell and the sound of a woodfire is an enjoyable addition to any home. However, it is important to know the correct method to create a fire on your stove. Improper techniques can result in a fire which does not burn efficiently, and produces creosote or smoke. The following tips will help you begin a fire that is safe and will warm your home quickly and effectively.

Make sure to check the condition of your coals and logs before you begin a fire. If they are wet, it will smother your fire and prevent the proper burning. It is possible to open the chimney to remove any ash that's fallen into the stove.

Begin by placing a handful of small, dry pieces of newspaper into your stove. This will help ignite the sparks. When the tinder and the kindling are beginning to burn, you can add a layer of larger kindling pieces on the top. This should be done in a crosshatch pattern, so that there will be air between each piece of wood.

If you have a wood stove that has an automatic control for combustion it will automatically supply a controlled stream of air to the fire as it builds. This will allow the fire to burn at a steady rate without having to constantly open the stove's doors to keep it in check.

It is important to not use excessive tinder as this can lead to a fire that burns at an excessive rate and doesn't use the fuel as efficiently as it can. If you have a nice bed of tinder and kindling in your stove, start the main fire by laying two large base logs on the grill. Then, add an additional layer of smaller logs perpendicular to these and on top of the base logs. This method of building the fire is called a "top-down" fire will result in an effective and long-lasting fire that will not completely consume the larger base logs.

Close the damper when the fire is established and kept it closed. The fire could be smothered if you open the damper prior to it being fully established. It can also decrease the effectiveness of the fire.

Add Wood

Stoves can be used to heat your home efficiently and save you money. They can be used by themselves or together with a furnace or central heating system to provide the additional heat required in large houses or houses with a lot of rooms. The latest stoves that burn clean use a superior combustion principle that separates the burning of volatile compounds from the combustion of combustible gases and tar by providing air in two different stages. The first stage is for the vaporization process, and the second step is to provide pre-heated fresh air. This improves combustion and decreases odors.

The amount of heat that you will get from your stove will depend on the kind of wood used as well as the moisture content and the size of the logs. To let the wood dry, logs must be stored in a ventilated area for a few months prior to burning. If the logs are too wet, they will produce a lot of steam that is basically wasted energy.

You should add wood to the pile at intervals and not all at one time. In addition, adding too much wood at once can cause the temperature of the firebox to rise, and produces a vortex that sucks smoke and unburnt volatile compounds back into the best wood burning stoves flame, which can decrease the efficiency of your stove.

It is recommended to stay clear of other combustibles such as paper or cardboard in your stove, since they are not wood and have very different physical properties and cannot be burned without causing dangerously high temperatures and exorbitant emissions. It is not recommended to burn compressed combustibles such as wood briquettes because they differ in physical and chemical composition from firewood. They are also not approved by the type to be burned in wood burning stoves.

It is crucial to have a professional install and test your wood burning stove. A certified WETT technician will test your stove to ensure it is safe and reliable. They can also make sure whether your chimney is working properly. These professionals offer maintenance services for your chimney and stove to keep them in top condition. They can check for leaks in the areas connected to your chimney and fix any problems they find. They will also make sure that all occupants of the house understand and adhere to the fire evacuation procedures in case of an accident.

Adjusting the Damper

A damper controls the amount of heat that is lost to the chimney when you aren't cooking on your stove. It can also be used to control the fire. If the flue opens, but the damper is closed the fire will not burn properly and smoke will pour into your home. To ensure you have the most efficient fire, with your damper adjusted properly you should test different settings and observe how each one affects the flames.

You should keep your damper open to let air enter and exit the flue when a flame is burning. This will allow the fire to begin and remain lit for a number of hours. The right opening can stop the fire from becoming depleted of air and stop it from blowing smoke.

To properly adjust your damper it is important to first make sure that the fireplace has been preheated and that the wood stove is hot. This will ensure that the chimney is warm, and also that it has a strong draft. After this, the wood stove damper can be adjusted.

Once the fire has smolder a bit you should close the damper to about three-quarters of its full position. This will prevent warm air from the room from venturing into the chimney, while still permitting smoke to escape.

This is the best method to keep the fire from becoming too hot while keeping it lit. If you close the damper too tightly, it could block the draft from working, but if it is too wide, a cold breeze could blow through your home.

Placing your hand on the top of the flue pipe will show you how much the damper has sunk. If you can feel a small draft pushing against your hand, it's likely to be in the open position.

The damper settings can differ between stoves and even between different kinds of wood. Playing around with different settings will give you an idea of what you should look for, but you might need to tweak until you get the perfect setting for your stove.

Clean up

After an incident, it is crucial to clean the stove and flue. This will help to reduce the chance of a chimney fire which is the main reason for wood stove-related fires in homes. Creosote, a sticky material that can accumulate in the stovepipe, is extremely hazardous. It is caused by the moisture and wood particles that are not burned that are unable to escape from the fire. It can also be caused by poorly lit fires.

A regular cleaning routine helps keep the buildup of creosote at bay. The best method to do this is by sweeping the chimney at least once a year. It is also recommended that you get your stove wood burning - published on Mixup - and fireplace professionally cleaned and examined at least year.

Also, it's a good idea for you to clean the ash tray and the grates regularly. It is best woodburners to only burn wood that has been seasoned, as it will produce less creosote. It is also recommended to avoid burning cardboard, paper, plastic and other trash items. They can release chemicals that can be dangerous for respiratory illnesses and the air, which could be released into your home.

It is also essential to clean the glass of the wood stove on a regular basis. Most newer wood stoves have self-cleaning windows so they do not require as much cleaning. If you're not able to clean the glass of your wood stove as clean as you'd like, there are stove glass cleaners available that can be used on the window.

Other suggestions to maintain your wood stove include turning down the vent when you aren't using it, and cracking windows or doors to improve airflow. This will ensure that the fire is burning hotter, and more efficient. The wood stove will not need to work as hard in order to circulate air. It is also a good idea to not stack logs or keep them in the fire for prolonged durations of time, since this could cause warping and splitting. It is also a good idea to not use compressed combustible logs in your wood stove, because the paraffin they contain can melt and flow into the flue which could cause damage to the stove.