솔지에로펜션(소나무숲길로)

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they are not susceptible to get rusty or decay.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. You should take the time to make sure that your windows are in good working order.

For single pane windows it can be relatively simple to replace them, and the replacement will generally fit within the old frame very easily. However If you have double-pane windows that are secured by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this case, you will need to source some plastic spacers that help the new pane to fit properly into the frame of the window.

If you're planning to attempt to remove the window panes yourself it is important to wear appropriate safety gear, including thick gloves and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric and not on the floor which could cause them to be trampled.

It's a good idea to tape the gap once the glass has been removed. This will keep drafts and water from entering your property until a professional arrives to repair the window. It also acts as a barrier, preventing any intruders from getting access into your home. If the gap is large, you may be interested in the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues like sliding. A sagging window can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from becoming worse.

Repositioning the hinges could help fix a window that is sagging. To accomplish this, you'll need open the window to get to the frame. Then, using the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and verify the fit. If you're happy with the fit, tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry and cause their tightness to decrease. It is crucial to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is usually due to screws that have been removed over time, but it can be due to the mechanism of the handle getting worn out. It's relatively easy to repair a loose uPVC handle. You'll first need to close the window and perform a test fitting. The corner joints of the sash must align with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is crucial to act if you get up each morning to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how serious the issue is, old caulking might need to be removed. It is important to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could reduce your energy efficiency.

Check that any drainage holes are free of debris in them, and also ensure that the sill pan is angled correctly to drain away from the window. In more extreme situations, you may have to replace the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can quickly spread throughout the house.

It is also important to remember that if the leak is coming from between the glass in your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. This can be easily repaired by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open in a breeze it could be hinges at fault. These are easily repaired by any skilled DIYer and can usually be completed in just a few minutes.

Like any mechanical component hinges will be damaged over time. It is essentially a simple process but it can be simpler with someone else to help you hold the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. You can do this by checking for the arrows on each hinge. This shows which way the window should be opened.

The issue could be caused by opening the window incorrectly or a faulty installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to offer advice.

It is also crucial to grease the hinges regularly. Applying a light engineering lubricant to the hinges is an ideal way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. The ideal time to do this at least once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your upvc Window Repair window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges can also become unbalanced due to wear, which can cause gaps between the frame and sash. If they are beyond repair, it might be required to realign them. The second is the interlock, which is located on the hinge side of the window and can also be misaligned, and again it is possible to give them a thorough clean, however in some cases it might be necessary to have these replaced.

The next common reason for draughts is window seals. They are susceptible to being worn out or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and decrease the risk of draughts.

Another, and most effective ways to cut down on the draughts in your home is to use a draught excluder. These are usually fabric tubes which are filled with a type of filler. They can be placed on the top of your windowsill. They can help block out cold air and keep your home warm and cosy!

With a little regular maintenance and repair your windows made of upvc will continue to provide excellent insulation and security for your home. However, it is important to recognise that all windows have a life span and there may come an point at which it is more cost-effective to replace them rather than repair them. If you encounter any issues with your window made of upvc, it's best to consult an expert as soon as possible.